Too many network cards still need manual work on SliTaz: either the kernel driver is missing, or the driver is there but its firmware is not installed. Before 5.1 we want most of them to work out of the box, live and installed.
Update, October 24: the firmware package now follows linux-firmware 20261019 (October 2026), split into 50 small packages per hardware family. The kernel drivers (step 2), the firmware on the ISOs (step 3) and get-b43-firmware (step 5) are in too, and the reprise fixes database installs the missing firmware it finds.
We counted it on the 6.12 kernel: 69 network and Bluetooth drivers need a firmware, and our packages fully covered 21 of them. Most of our firmware came from a linux-firmware snapshot of May 2020.
The plan, in five steps:
1. A recent linux-firmware, split into small packages per family: Realtek Wi-Fi (rtw88, rtw89), MediaTek, Qualcomm ath11k, Broadcom brcm, Intel iwlwifi, Realtek and Intel Bluetooth, recent Realtek Ethernet (RTL8125, RTL8153).
2. A kernel rebuild with the drivers we do not build yet: MediaTek mt76 (MT7921/7922/7925, MT7601U and other USB dongles), Realtek rtw89, Qualcomm ath11k, rtl8xxxu and rtw88 USB, Broadcom brcmfmac PCIe.
3. The small firmware on the ISOs (Realtek Wi-Fi, Bluetooth and Ethernet, Ralink...), so a live session finds its network. The big ones get installed on demand.
4. The right firmware installed automatically: at install time and at first boot, from the PCI and USB cards found. reprise gets a generic repair to install the firmware a driver asks for.
5. Broadcom b43 cards (BCM43xx): their firmware cannot be redistributed, a small get-b43-firmware package will extract it on the machine.
Already done this week: the reprise fixes database (release 2) installs the missing Realtek Wi-Fi (rtlwifi) and Ethernet (rtl_nic) firmware it finds in the boot log.
Your card does not work on SliTaz? Send a report with TazHelper or filature-report: it tells us which driver and which firmware are missing.
Update, October 24: the firmware package now follows linux-firmware 20261019 (October 2026), split into 50 small packages per hardware family. The kernel drivers (step 2), the firmware on the ISOs (step 3) and get-b43-firmware (step 5) are in too, and the reprise fixes database installs the missing firmware it finds.
We counted it on the 6.12 kernel: 69 network and Bluetooth drivers need a firmware, and our packages fully covered 21 of them. Most of our firmware came from a linux-firmware snapshot of May 2020.
The plan, in five steps:
1. A recent linux-firmware, split into small packages per family: Realtek Wi-Fi (rtw88, rtw89), MediaTek, Qualcomm ath11k, Broadcom brcm, Intel iwlwifi, Realtek and Intel Bluetooth, recent Realtek Ethernet (RTL8125, RTL8153).
2. A kernel rebuild with the drivers we do not build yet: MediaTek mt76 (MT7921/7922/7925, MT7601U and other USB dongles), Realtek rtw89, Qualcomm ath11k, rtl8xxxu and rtw88 USB, Broadcom brcmfmac PCIe.
3. The small firmware on the ISOs (Realtek Wi-Fi, Bluetooth and Ethernet, Ralink...), so a live session finds its network. The big ones get installed on demand.
4. The right firmware installed automatically: at install time and at first boot, from the PCI and USB cards found. reprise gets a generic repair to install the firmware a driver asks for.
5. Broadcom b43 cards (BCM43xx): their firmware cannot be redistributed, a small get-b43-firmware package will extract it on the machine.
Already done this week: the reprise fixes database (release 2) installs the missing Realtek Wi-Fi (rtlwifi) and Ethernet (rtl_nic) firmware it finds in the boot log.
Your card does not work on SliTaz? Send a report with TazHelper or filature-report: it tells us which driver and which firmware are missing.